WITIW MAX series laser projector adopts 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology, which effectively uses the light source to reduce the light loss. It has the characteristics of high brightness efficiency, large color space, energy saving and environmental protection.
Compared with other projection technologies, the use of 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology enables WITIW MAX series projectors to project high color brightness, clear, bright and gorgeous images, without color overflow and rainbow phenomenon, which can make viewing more comfortable.
Max series laser projector uses a new laser light source, with laser optics and cooling design, making this new product light, convenient and quiet, and longer light source life.
No mechanical motor ceramic phosphor overcomes the defect of traditional phosphor wheel losing brightness at high temperature. With the excellent design of laser optics and cooling, this new product is light, convenient, quiet and has longer light source life.
The dynamic high contrast ratio of 2.5 million to 1 can better show the details of the delicate picture and light and shade contrast, and bring the user a subtle experience as if they were on the scene.
WUXGA (1920x1200 pixels) can present full HD video images, even if projected on the large screen, it can still maintain clear and vivid details, bringing users a dynamic visual experience.
Max series provides automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, corner correction and other functions.
When the projector is in standby mode and the input of computer in1, hdmi2 and video port is detected, the projector will automatically start to display images. When the standby mode is set to network standby (WOL) or energy saving, this function is not available.
Max series projectors support 360 degree omni-directional projection, and users can easily realize their creativity.
After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown.
If the vertical angle of the projector is different from the previous setting, the alarm will be given and the input signal will not be displayed.
According to the test results of air pressure at different altitudes, the fan speed of the projector is controlled to ensure the stable operation of the projector, so that the projector can adapt to the "plateau effect".
The short focus projection lens can project a 100 inch image at a distance of 1.1 meters, greatly reducing the glare of the projector, making the image difficult to be blocked, and giving the audience a clearer perspective.
The timer function realizes the timing and countdown of the conference and teaching courseware. By simply displaying the time on the screen, it makes the work and teaching more convenient, and the warning voice is soft, not easy to distract the audience.
It can provide up to 2A and stable 5V power supply for streaming media devices (TV box, mini computer stick), etc.
Powerful 1.6x manual zoom lens, projector can be installed in a wider range.
Two high-quality image adjustment modes for HDR make the projection picture more realistic by activating and expanding the dynamic range of brightness.
According to the HDR signal information, adjust the best HDR display mode, so as to obtain more realistic images.
The geometric correction function can be used to image on cylinder, sphere and other curved objects, and the distortion of the image can be adjusted by using the surface correction function.
Multiple projectors can realize seamless splicing of large images through edge blending function.
The powerful 1.7x manual zoom lens can be installed in a wider range, and can be moved manually horizontally and vertically, without causing picture distortion. The picture is easier to aim at the screen during installation.
|Projection type||Laser 3-chip LCD projector|
|Display technology||0.76 inch Poly-silicon TFT Active Matrix liquid crystal panel × 3|
|Brightness||8500 ISO lumens|
|Contrast ratio||2,500,000:1(Dynamic mode)|
|Light source lifetime||20,000 hours(Standard/Low noise);30,000 hours(Long service life 1);50,000 hours(Long service life 2)|
|Optical lens shift||Electric shift|
|Lens type||Electric zoom/Electric focusing|
|Geometric correction||Automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, support corner correction|
|4K input||HDMI 1, HDBaseT and DisplayPort ports support 4K signal input|
|Inputs||HDMI connector ×2, DisplayPort connector x1, 15 pin Mini D-sub terminal × 2, Video RCA terminal ×1, 3.5mm (stereo) mini-jack × 1, Audio RCA Jack L/R × 1, HDBaseT RJ-45 port × 1, 3G-SDI BNC port × 1|
|Outputs||15 pin Mini D-sub terminal × 1 (shared by computer in 2), 3.5mm (stereo) mini jack × 1|
|Control||9-pin D-sub terminal × 1;REMOTE CONTROL IN 3.5mm (stereo) mini-jack x1,REMOTE CONTROL OUT 3.5mm (stereo) mini-jack x1|
|WLAN interface||Support the purchase of USB wireless adapter USB-WL-5G|
|Other interfaces||USB(A)×1,USB(B)×1,LAN RJ-45 Jack ×1|
|Internet of Things(IoT)||Crestron RoomView (Compatible) ; AMX Device Discovery (Compatible); EXTRON XTP (Compatible); PJ Link (Compatible)|
|Wide dynamic range(WDR)||Yes|
|DICOM simulation mode||Yes(This projector is not a medical device. Do not use this mode for actual diagnosis)|
|Quick Start||After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown|
|Auto power on||When the projector is in standby mode and the input of computer in1, hdmi2 and video port is detected, the projector will automatically start to display images. When the standby mode is set to network standby (WOL) or energy saving, this function is not available.|
|360 degree projection||Yes|
|Noise level||34dB ~ 26dB (Standard mode, Ambient Temperature not higher than 23 ℃); 34dB ( Longer service life 1); 34dB (Longer service life 2); 26dB (Silent mode)|
|Standby power||0.5W(Energy saving mode)|
|Operational ambient||Temperature 0-45 ℃ (Altitude 0-1600m); Temperature 0-40 ℃ (Altitude 1601-3048 m); Humidity 10% - 80% (No condensation); Altitude above 3048 m is not applicable|
|Storage ambient||Temperature 0℃ ~ 50℃; Humidity 20%~80%(No condensation)|
|Net weight||About 18.2 kg|
|Dimensions (WxHxL)||582 x 215 x 431 mm (Protuberance not included)|
|Product Certification||CCC(China Compulsory Certification); CECP(China Energy-saving Certification Protucts); CEL(China Energy Label);|
|MAX-WU85 Live Viewer||2021/3/20|
|MAX-WU85 Projector Management Application||2021/3/20|
|MAX-WU85 Projector Control Application||2021/3/20|
|MAX-WU85 Projector Image Tool||2021/3/20|
|MAX-WU85 Projector Messenger||2021/3/20|
|MAX-WU85 Projector Warping Tool||2021/3/20|
|MAX-WU85 Projector Blending Tool||2021/3/20|
|MAX-WU85 Projector Data Cloning||2021/3/20|