Laser 3-chip LCD projector
MAX-WU55S
MAX-WU55S
WITIW MAX series laser projector adopts 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology, which effectively uses the light source to reduce the light loss. It has the characteristics of high brightness efficiency, large color space, energy saving and environmental protection.
Compared with other projection technologies, the use of 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology enables WITIW MAX series projectors to project high color brightness, clear, bright and gorgeous images, without color overflow and rainbow phenomenon, which can make viewing more comfortable.
FEAURES
New laser source technology
Max series laser projector uses a new laser light source, with laser optics and cooling design, making this new product light, convenient and quiet, and longer light source life.
No motor laser source
No mechanical motor ceramic phosphor overcomes the defect of traditional phosphor wheel losing brightness at high temperature. With the excellent design of laser optics and cooling, this new product is light, convenient, quiet and has longer light source life.
High contrast:1500000:1
The dynamic high contrast ratio of 1.5 million to 1 can better show the details of the delicate picture and light and shade contrast, and bring the user a subtle experience as if they were on the scene.
High resolution:WUXGA
WUXGA (1920x1200 pixels) can present full HD video images, even if projected on the large screen, it can still maintain clear and vivid details, bringing users a dynamic visual experience.
Geometric correction = trapezoid + corner
Max series provides automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, corner correction and other functions.
Auto power on
When the projector is in standby mode and the input of computer in1, hdmi2 and video port is detected, the projector will automatically start to display images. When the standby mode is set to network standby (WOL) or energy saving, this function is not available.
All directions: 360 degree projection
Max series projectors support 360 degree omni-directional projection, and users can easily realize their creativity.
Quick start: second response
After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown.
Status monitoring function
If the vertical angle of the projector is different from the previous setting, the alarm will be given and the input signal will not be displayed.
Air pressure sensing monitoring
According to the test results of air pressure at different altitudes, the fan speed of the projector is controlled to ensure the stable operation of the projector, so that the projector can adapt to the "plateau effect".
Simple: short focus projection
The short focus projection lens can project a 100 inch image at a distance of 1.1 meters, greatly reducing the glare of the projector, making the image difficult to be blocked, and giving the audience a clearer perspective.
Timer on screen
The timer function realizes the timing and countdown of the conference and teaching courseware. By simply displaying the time on the screen, it makes the work and teaching more convenient, and the warning voice is soft, not easy to distract the audience.
USB-A Power Supply
It can provide up to 2A and stable 5V power supply for streaming media devices (TV box, mini computer stick), etc.
Simple: 1.6x zoom lens
Powerful 1.6x manual zoom lens, projector can be installed in a wider range.
HDR High image quality
Two high-quality image adjustment modes for HDR make the projection picture more realistic by activating and expanding the dynamic range of brightness.
HDR and HDR detection
According to the HDR signal information, adjust the best HDR display mode, so as to obtain more realistic images.
Geometric correction (Deformation)
The geometric correction function can be used to image on cylinder, sphere and other curved objects, and the distortion of the image can be adjusted by using the surface correction function.
Edge blending and urved surface projection
Multiple projectors can realize seamless splicing of large images through edge blending function.
1.7 times shift zoom lens
The powerful 1.7x manual zoom lens can be installed in a wider range, and can be moved manually horizontally and vertically, without causing picture distortion. The picture is easier to aim at the screen during installation.
Optional lens
SPECS
| Projection type | Laser 3-chip LCD projector |
| Display technology | 0.64 inch Poly-silicon TFT Active Matrix liquid crystal panel × 3 |
| Brightness | 5500 ISO lumens |
| Resolution ratio | 1,920×1,200 |
| Contrast ratio | 1,500,000:1(Dynamic mode) |
| Aspect ratio | 16:10 |
| Light source | Laser |
| Light source lifetime | 20,000 hours(Standard/Low noise);30,000 hours(Long service life 1);50,000 hours(Long service life 2) |
| Optical lens shift | Fixed, No Lens shift |
| Lens type | Manual focusing/No zoom |
| Projection ratio | 0.56 |
| Geometric correction | Automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, support corner correction |
| Inputs | HDMI connector ×3, 15 pin Mini D-sub terminal × 2, Video RCA terminal ×1, 3.5mm (stereo) mini-jack × 3, Audio RCA Jack L/R × 1 |
| Outputs | 15 pin Mini D-sub terminal × 1 (shared by computer in 2), 3.5mm (stereo) mini jack × 1 |
| Control | 9-pin D-sub terminal × 1 |
| WLAN interface | Support the purchase of USB wireless adapter USB-WL-5G |
| Other interfaces | USB(A)×1,USB(B)×1,LAN RJ-45 Jack ×1 |
| Internet of Things(IoT) | Crestron RoomView (Compatible) ; AMX Device Discovery (Compatible); PJ Link (Compatible) |
| Speaker | 16W |
| Wide dynamic range(WDR) | Yes |
| Detail enhance(DE) | Yes |
| DICOM simulation mode | Yes(This projector is not a medical device. Do not use this mode for actual diagnosis) |
| Quick Start | After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown |
| Air pressure sensing monitoring | According to the test results of air pressure at different altitudes, the fan speed of the projector is controlled to ensure the stable operation of the projector, so that the projector can adapt to the "plateau effect" |
| Status monitoring function | If the vertical angle of the projector is different from the previous setting, the alarm will be given and the input signal will not be displayed |
| 360 degree projection | Yes |
| Noise level | 36dB/29dB(Standard/Low noise,the ambient temperature is not higher than 23℃ ); |
| Power requirements | AC100-240V |
| Power consumption | 360W |
| Standby power | 0.5W(Energy saving mode) |
| Operational ambient | Temperature 0-40 ℃ (Altitude 0-1600m); Temperature 0-35 ℃ (Altitude 1601-3048 m); Humidity 10% - 80% (No condensation); Altitude above 3048 m is not applicable |
| Storage ambient | Temperature 0℃ ~ 50℃; Humidity 20%~80%(No condensation) |
| Net weight | About 8.0 kg |
| Dimensions (WxHxL) | 506 x 136 x 424 mm (Protuberance not included) |
| Product Certification | CCC(China Compulsory Certification); CECP(China Energy-saving Certification Protucts); CEL(China Energy Label); |
**The above is only an offer invitation, and the contract is the only way of commitment.
OTHER
| MAX-WU55S manual | 2021/3/20 |
| MAX-WU55S Live Viewer | 2021/3/20 |
| MAX-WU55S Projector Management Application | 2021/3/20 |
| MAX-WU55S Projector Control Application | 2021/3/20 |
| MAX-WU55S Projector Image Tool | 2021/3/20 |
| MAX-WU55S Projector Messenger | 2021/3/20 |
| MAX-WU55S Projector Warping Tool | 2021/3/20 |
| MAX-WU55S Projector Blending Tool | 2021/3/20 |
| MAX-WU55S Projector Data Cloning | 2021/3/20 |